Raditeq RadiPower® – 4006R – 6 GHz

GET PRICING REQUEST MORE INFO

Raditeq RadiPower® – 4006R – 6 GHz

RadiPower® – 4006R – 4 kHz – 6 GHz

Specifications

  • Measuring function: RMS power
  • Measurement speed: 1 MS/s | 5 MS/s
  • Resolution: 0,01 dB
  • Measuring units: dBm or Watt
  • Zero adjustment: Not required
  • Input damage level: >+20 dBm

For further technical specifications, please refer to datasheet

 

Standard delivered including

  • RadiPower RPR4006R – RF Power Meter
  • USB Cable
  • A protective Case of the RadiPower
  • Digital Manuals on a USB drive

Category:

Related products

Key Features

True RMS

For non CW measurement a RMS response is required. This can be done in multiple ways, the best way is to incorporate an RMS detector. This leads to a DC voltage that is proportional to the RF RMS value of the input signal. Performing this step in hardware and not relying on software computation results in higher accuracy and faster measurements. The RadiPower 4006R uses a true RMS detector, which ensures accurate power measurement of non-sinusoidal RF signals over the entire measuring range.

High dynamic range & speed

The RadiPower® RPR4006R offers a very high dynamic range (up to 80 dB) over the frequency range from 4 kHz to 6 GHz. Where most RF power meters will become (extremely) slow at low input amplitudes, the RadiPower® 40006R maintains its high measuring speed over the entire input power range. With measurement rates of up to 5 MS/s, fast true RMS power measurements become reality!

Accuracy and input matching

High measuring speed becomes useless if the measuring accuracy is poor. The RPR4006R power meter offers an improved accuracy of +/- 0.2 dB over the complete frequency range. By using a “true RMS” detector with active input ranging, the error contribution for non-sinusoidal signals with a high crest factor is less than 0.2 dB. To further improve the measurement accuracy, it is crucial that the input VSWR of the power meter is very low. Any deviation from 50 Ohms will result in measurement uncertainty that cannot be corrected. Therefore, the input VSWR of the RadiPower pro-series has been optimized to ensure that these uncertainties are minimized. This feature makes the RadiPower® 4000 series even better for accurate RF power measurements.

Ruggedized housing

The RadiPower® RPR4006R uses a robust, specially treated, aluminium housing. As a result, good RF shielding is combined with a sleek industrial appearance and a virtually scratch-free housing.

Easy to use

The RadiPower® RPR4006R is equipped with a USB interface that allows the power meter to be connected directly to the USB port of a Windows PC. RadiMation® (freeware) can be used to allow direct control over the power meter settings and display the measurement results on the PC screen.

Software support

The RadiPower® RPR4006R can be controlled by RadiMation® software (licensed) when being used for EMC immunity testing. Using the instrument command codes as defined in the manual, the RadiPower® RPR4006R can be used with any other software control package. Driver availability on request.

Application Notes

Manufacturer

Downloads