LRX Series Dual Line Single Phase Filters
ETS-Lindgren’s Dual Line Single Phase Filters are individual, stand-alone dual circuit filters from our LRX series of power line filters. ETS-Lindgren manufactures UL Listed power line filters in a variety of mechanical configurations to meet your requirements. The basic, general purpose filter is the LRX series.
The Dual Line Single Phase Filters are designed for wall-mounted installation. This dual circuit power line filter can be used on AC or DC power lines including two wire AC systems with both lines above ground or three wire AC systems where one of the conductors is at ground potential and grounded to the filter case.
The LRX series of power line filters are designed for 277 volt line-to-ground, 480 volt line-to-line, 0 to 60 Hz applications. However, these filters can also be used for lower voltage ratings, such as 120/208 volts, with no adverse effect.
| Model Number | Current Rating | Stopband Insertion Loss |
| LRX-2005-S2 | 2 x 5 A | 100 dB, 14 kHz to 40 GHz |
| LRX-2010-S2 | 2 x 10 A | 100 dB, 14 kHz to 40 GHz |
| LRX-2020-S2 | 2 x 20 A | 100 dB, 14 kHz to 40 GHz |
| LRX-2030-S2 | 2 x 30 A | 100 dB, 14 kHz to 40 GHz |
| LRX-2050-S2 | 2 x 50 A | 100 dB, 14 kHz to 40 GHz |
| LRX-2060-S2 | 2 x 60 A | 100 dB, 14 kHz to 40 GHz |
| LRX-20751-S2 | 2 x 75 A | 100 dB, 14 kHz to 40 GHz |
| LRX-2100-S2 | 2 x 100 A | 100 dB, 14 kHz to 40 GHz |
NOTE: For Installation on shield, filters can be ordered with penetration kit. Add “/PEN” to model numbers.
1 Non UL Listed
