Haefely HIAS 744-S

Haefely HIAS 744-S

Dielectric tests with impulse voltage are done to confirm the quality of insulation for HV equipment and are mandatory as per international standards. A defined impulse wave shape is applied to the test object and changes in the wave shape caused by the test object are used for detection of insulation faults. Determining these changed parameters exactly makes it absolutely necessary to have a fast and accurate measuring system. This procedure is commonly used for routine testing of transformers, cables, bushings, etc.

HAEFELY, the pioneer company for impulse testing since 1904, has been continuously developing and upgrading application specific high-voltage impulse measuring/analyzing solutions over the years. The latest in a long line of distinguished impulse analyzers is the Highest Resolution Impulse Analyzing System HiASTM 744. HAEFELY has set a new highwater mark with unmatched performance. The new front-end solution provides a 16-bit resolution at 250 MS/s with the highest measurement accuracy.
Software, which has been upgraded to suit the new hardware, retains the comfortable interface proven and tested by hundreds of satisfied users. Furthermore, it remains compatible with all previous versions of HiASTM data files, allowing for comparison to older measurements.
The optically decoupled front end provides complete galvanic isolation between control room and test field. It thus affords the personnel the highest safety level and in addition minimizes ground loop, resulting in a reduced interference coupling.

Advantages

  • The highest measurement accuracy in the market.
  • Excellent interference immunity & safe operation.
  • Integrated solution, no additional divider necessary, compatible with any divider ratio.
  • Synchronous multi-channel record.
  • Compliant, advanced state-of-the-art solution.
  • Software & solution proven by many hundreds of satisfied users.
  • No battery pack or recharge needed.
  • Category:

    Key Features

    • 16-bit resolution at 250 MS/s, 100 MHz analog bandwidth
    • Optically decoupled front-end solution
    • ± 2000 Vpk down to ± 5 Vpk analog input range with LEMO 4S connector
    • 2 Channels digitizer unit, can be cascaded
    • Exceeds latest IEC 61083-1, -2, IEC 60060-2, IEEE Std. 4 and related standards
    • 4th Generation digitizer
    • Mains powered

    Application Notes

    Manufacturer