-
The new AXOS8 expandable test system integrates all of the best features of several stand alone test systems into one single economic...
FIND OUT MORE
-
The DEC 5 is used for decoupling auxiliary equipment from an EUT tested with either 1,2/50µs – 8/20µs combination wave impulses or 10/700µs...
FIND OUT MORE
-
Product Overview The DEC 6 is used for decoupling auxiliary equipment from an EUT tested with 10/700us impulses up to 6.6kV peak. It is used to...
FIND OUT MORE
-
The DEC 7 is used for decoupling auxiliary equipment from an EUT tested with either 1,2/50ms-8/20ms combination wave impulses or ring wave 100kHz...
FIND OUT MORE
-
The FP-COMB 32 coupling/decoupling network – for Surge Combination Wave, Ring Wave and EFT/Burst – is fully compliant with the standard...
FIND OUT MORE
-
IEC and EN standards cover testing of 3 phase AC and DC power ports. They include recommendations for the coupling and decoupling component values...
FIND OUT MORE
-
The FP-SURGE 63M is a manual coupler designed to meet the needs of IEC 61000-4-5 Edition 3.0 and IEC 61000-4-12 Edition 3.0. As a 19” racked system...
FIND OUT MORE
-
The new Haefely AXOS5 Compact Immunity Test System integrates all of the best features of our stand alone test systems into one single economic...
FIND OUT MORE
-
The FP-EFT 100M2 is a manual three phase coupling / decoupling network (CDN) used for thee phase emc testing applications. The CDN can be used with...
FIND OUT MORE
-
The FP-EFT 32M is a manual three phase coupling/decoupling network (CDN) used for thee phase emc testing applications. The CDN can be used with most...
FIND OUT MORE
-
This product has now been replaced by the Haefely MAG 1000 for IEC/EN 61000-4-8 and the Haefely MSURGE-A for IEC/EN 61000-4-9. The MFS 100 test...
FIND OUT MORE
-
The accurate measurement of Surge pulses for equipment calibration purposes requires that a Surge generator output be measured in both Differential...
FIND OUT MORE
-
Introducing the VTM 15000/05, the voltage transformer that can multiply your input voltage by two without altering the waveform. This device is...
FIND OUT MORE
-
The IP4B capacitive coupling clamp is primarily used to inject fast transient and burst interference pulses into signal and data cables, i.e. into...
FIND OUT MORE
-
The MAG 1000 is a stand-alone solution to be used for EMC Tests requiring AC Magnetic Fields. Power frequency magnetic fields are generated by AC...
FIND OUT MORE
-
The MSURGE-A is plug-and-play compatible with either the AXOS 5 or AXOS 8 in order to perform pulsed magnetic field tests according to IEC/EN...
FIND OUT MORE
-
The PCD 121 is used for coupling of 1,2/50us – 8/20us combination wave impulses up to 6.6kV peak onto unshielded symmetrical data and signal lines...
FIND OUT MORE
-
The PCD 122 is used for coupling of 10/700µs impulses up to 6.6kV peak onto unshielded symmetrical data and signal lines according IEC/EN and ITU...
FIND OUT MORE
-
The PCD 126A is used for surge coupling of 1,2/50us – 8/20us combination wave impulses onto unshielded asymmetrical data and signal lines according...
FIND OUT MORE
-
The PCD 150 is used for surge coupling onto unshielded data- and signal lines according to IEC/EN standards. Damped oscillatory waves with both...
FIND OUT MORE
-
The PEFT 8010 is the state-of-the-art EFT/Burst Immunity Test System with a built-in coupling/decoupling network for single phase or three-phase...
FIND OUT MORE
-
IEC 61000-4-5 and ANSI C62.41 describe a combination Wave or Hybrid generator with defined open AND short circuit waveforms. The Combination Wave is...
FIND OUT MORE
-
PIM 110 as part of the PSURGE 8000 Surge Platform System can be used together with Coupling/Decoupling Networks (CDNs) for superimposition of the...
FIND OUT MORE
-
PIM 120 as part of the PSURGE 8000 Surge Platform System can be used together with Coupling / De-coupling Networks (CDNs) for superimposition of the...
FIND OUT MORE
-
IEC 61000-4-12 Ed.1, IEC 61000-4-18 Ed.1 and ANSI C37.90 describe an oscillating wave generator with defined open circuit waveforms parameters. The...
FIND OUT MORE
-
The PS 1500 generator is fully compliant to the IEC, EN and UL requirements for safety testing if ITE, Audio Video and similar equipment. Clause 10...
FIND OUT MORE
-
This test system is used to perform high energy surge tests. Energy surges are generated by atmospheric lightning in power circuits. A surge...
FIND OUT MORE
-
The PSURGE 8000 test system meets all your current and future surge testing requirements! A modular expandable system that grows with your...
FIND OUT MORE
-
The TW8 Telecom Wave Impulse Module is the perfect extension of your AXOS 5 or AXOS 8 Immunity Test System if Telecom Surge Immunity Tests according...
FIND OUT MORE
-
The VTM 15000 is used for isolation testing with 1.2/50?s voltage impulses. The VTM 15000 runs together with a combination wave generator such as...
FIND OUT MORE