Electromagnetic Compatibility (EMC) /
LISN
Line Impedance Stabilisation Networks (LISNs) are used to measure conducted emissions on power lines. The LISN draws power from the ordinary wall outlet and feeds this to the equipment under test (EUT). Any RF noise generated by the EUT is separated by the LISN and fed to the spectrum analyser for measurement or recording. MDL Technologies offer both CISPR & MIL-STD LISN Test Systems & Equipment for organisations across the UK.
Line Impedance Stabilisation Networks (LISNs) are used to measure conducted emissions on power lines. The LISN draws power from the ordinary wall outlet and feeds this to the equipment under…
...(EUT). Any RF noise generated by the EUT is separated by the LISN and fed to the spectrum analyser for measurement or recording.
MDL Technologies offer both CISPR & MIL-STD LISN Test Systems & Equipment for organisations across the UK.
-
The objective of EMI Conducted tests is to define the amplitude of current Ic and Voltage Vc emission from the Device Under Test (DUT) onto the power...FIND OUT MORE -
PMM Narda 7010 Series Pre-compliance EMI Reciever. All measurements performed by the 7010 are according to the most accepted standards like: IEC,...FIND OUT MORE -
The single-phase V-network PMM’s Artificial Mains Network L1-150M, with an equivalent circuit of 50 ohm // (1ohm + 5uH), meets the requirements...FIND OUT MORE -
The single-phase V-network PMM’s Artificial Mains Network L1-150M1, with an equivalent circuit of 50 ohm // (1ohm + 5uH), meets the...FIND OUT MORE -
The objective of EMI Conducted tests is to define the amplitude of current Ic and Voltage Vc emission from the Device Under Test (DUT) onto the power...FIND OUT MORE -
The objective of EMI Conducted tests is to define the amplitude of current Ic and Voltage Vc emission from the Device Under Test (DUT) onto the power...FIND OUT MORE -
The objective of EMI Conducted tests is to define the amplitude of current Ic and Voltage Vc emission from the Device Under Test (DUT) onto the power...FIND OUT MORE -
The objective of EMI Conducted tests is to define the amplitude of current Ic and Voltage Vc emission from the Device Under Test (DUT) onto the power...FIND OUT MORE -
3-Phase, the AMN – Artificial Mains Network, also known as LISN – Line Impedance Stabilization Network – is the ancillary device...FIND OUT MORE -
The SBRF4 RF Switching Box is a versatile Accessory designed to operate the PMM Artificial Mains Networks (LISN) and the RF 300 Large Loop Antenna by...FIND OUT MORE
