-
AS-07 is a compact broadband antenna set composed of a Tripod and a BL-01 Bi-Conical Log-periodic Dipole Array designed for radiated emissions and...
FIND OUT MORE
-
AS-08 is a compact broadband antenna set composed of a BL-01 Bi-Conical Log-periodic Dipole and DR-01 Double Ridged Horn Antenna designed for...
FIND OUT MORE
-
The PMM Narda BC-01 Biconical Dipole Antenna, the perfect solution for high-quality RF signal transmission and reception across the frequency range...
FIND OUT MORE
-
PMM Narda BL-01 is a Bi-Conical Log-periodic antenna designed for radiated emissions and immunity testing that can be used in conjunction with any...
FIND OUT MORE
-
Introducing the PMM Narda CA0010, an innovative click analyzer designed to work seamlessly with the 9010F EMI FFT receiver. This powerful device...
FIND OUT MORE
-
The PMM COND-IS RF Conducted Immunity System with components and test management software is designed for compliance testing to IEC/EN 61000-4-6 and...
FIND OUT MORE
-
The PMM Narda DR-01 is a broadband double ridged horn antenna operating in the frequency range of 6 GHz – 18 GHz. The DR-01 is designed for...
FIND OUT MORE
-
The PMM Narda Emission Suite is a very powerful software tool specifically designed to operate a wide range of PMM EMI Receivers, which could differ...
FIND OUT MORE
-
Extra compact, flexible and easy-to-use, the PMM Narda ER8000 is a high performance, full CISPR 16-1-1 compliant EMI receiver perfect for any...
FIND OUT MORE
-
The PMM Narda FR4003 Field Receiver , is a new reference in measuring electric fields up to 30 MHz. Thanks to its innovative approach, it replaces...
FIND OUT MORE
-
The single-phase V-network PMM’s Artificial Mains Network L1-150M, with an equivalent circuit of 50 ohm // (1ohm + 5uH), meets the requirements...
FIND OUT MORE
-
The single-phase V-network PMM’s Artificial Mains Network L1-150M1, with an equivalent circuit of 50 ohm // (1ohm + 5uH), meets the...
FIND OUT MORE
-
The objective of EMI Conducted tests is to define the amplitude of current Ic and Voltage Vc emission from the Device Under Test (DUT) onto the power...
FIND OUT MORE
-
The objective of EMI Conducted tests is to define the amplitude of current Ic and Voltage Vc emission from the Device Under Test (DUT) onto the power...
FIND OUT MORE
-
The objective of EMI Conducted tests is to define the amplitude of current Ic and Voltage Vc emission from the Device Under Test (DUT) onto the power...
FIND OUT MORE
-
The objective of EMI Conducted tests is to define the amplitude of current Ic and Voltage Vc emission from the Device Under Test (DUT) onto the power...
FIND OUT MORE
-
3-Phase, the AMN – Artificial Mains Network, also known as LISN – Line Impedance Stabilization Network – is the ancillary device...
FIND OUT MORE
-
The PMM Narda LP-02 Log Periodic Dipole Array obtain a broadband excellent VSWR characteristics thanks to its accurate design of the feed and...
FIND OUT MORE
-
The PMM Narda LP03 Log Periodic Dipole Array Antenna obtain a broadband excellent VSWR characteristics thanks to its accurate design of the feed and...
FIND OUT MORE
-
The PMM PS-400 Near Field Probe set includes three probes: a tip probe, a broadband probe, and a H-field probe. The tip probe is a precision E-field...
FIND OUT MORE
-
The PS-500 is a Near Field Probe set that includes four probes and a custom storage case. Designed for performance and ease of use, the PS-500’s...
FIND OUT MORE
-
The PMM Narda RA01 is designed to provide a good solution to measure low level fields from 9 kHz to 30 MHz (RA-01) and 150kHz to 30MHz (RA-01-HV) It...
FIND OUT MORE
-
The PMM Narda RF300 large loop antenna has been developed to meet the requirements of EN55015: 2006 + A2: 2009, section 9.9.1, which refers to...
FIND OUT MORE
-
The PMM Switching Operation Box when used with the PMM 9010F FFT RF receiver with relevant software key provides a single channel Click Analyser...
FIND OUT MORE
-
Accurate in laboratory, fast in manufacturing and solidly built for field applicationsPMM 6630 is the ideal solution for RF power measurements in a...
FIND OUT MORE
-
The Model H-491269 Probe Stand is designed for accurate and repeatable probe positioning when performing field uniformity calibration in accordance...
FIND OUT MORE
-
The ETS-Lindgren ProbeView™ II software provides data gathering and viewing options for use with these ETS-Lindgren EMC Field Probes: HI-60XX...
FIND OUT MORE
-
FerroSorb™ PS is the latest evolution of ETS-Lindgren low profile, hybrid anechoic absorber technology. It combines proven FerroSorb™...
FIND OUT MORE
-
The PS 1500 generator is fully compliant to the IEC, EN and UL requirements for safety testing if ITE, Audio Video and similar equipment. Clause 10...
FIND OUT MORE
-
This test system is used to perform high energy surge tests. Energy surges are generated by atmospheric lightning in power circuits. A surge...
FIND OUT MORE
-
The PSURGE 8000 test system meets all your current and future surge testing requirements! A modular expandable system that grows with your...
FIND OUT MORE
-
Product Overview R&S®ES-SCAN is a cost-efficient and user- friendly 32-bit Windows software application that has been specially designed for...
FIND OUT MORE