Uncategorised

The new HMO3000 series by HAMEG Instruments offers our usual excellent performance at an attractive price. The standard MSO functionality allows you...

Without doubt, the oscilloscope is the most important measuring instrument for the characterization of signals in the time domain. HAMEG Instruments...

In the HMP series there are two 200?W and two 400?W types available which cover the range of 0...32?V and up to 10?A, depending on the number of...

In the HMP series there are two 200?W and two 400?W types available which cover the range of 0...32?V and up to 10?A, depending on the number of...

You can create your R&S® HMS-X spectrum analyzer by combining a basic unit with any of three available options. These are the tracking...

ETS-Lindgren High Power Microwave Absorber is fabricated from high temperature materials. The pyramidal-shaped substrate is coated with a conductive...

Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic...

The IP4B capacitive coupling clamp is primarily used to inject fast transient and burst interference pulses into signal and data cables, i.e. into...

Hioki insulation resistance testers or megohmmeters feature all-in-one designs including built-in rugged cases and test lead storage compartments....

The Hioki IR4053 is a digital insulation resistance tester for photovoltaic generation systems. Measure insulation resistance accurate and safely...

The KAL 9510 has been designed to fulfil the standard requirements of a PD calibrator. Its very wide range (from 1 pC to 50 nC), its small injection...

Partial discharge calibrator KAL 9511 is a successor to the popular Tettex 9216. KAL 9511 covers a wide range of applications. It is compact, easy to...

The KAL 9520 has been designed to exceed the standard requirements of a PD calibrator. Its wide range (from 100 fC to 50 nC), its small injection...

Radio Influence Voltage (RIV) calibrator KAL 9531 is a successor to the popular Tettex 9220a. However, KAL 9531 exceed functions of its predecessor...

KEV series cable test terminations are used for AC testing as well as for partial discharge and tan delta measurements on plastic-insulated medium...

C3000H series is a high performance, programmable DC power supply developed by Kewell. It supports high DC voltage output with IV simulation. IV...

Based on the field of power electronics, EBD/EBDH Series Battery Pack Charge-discharge Test Power Supply is a bidirectional DC source integrating...

High precision DC power supply for use in E-motor (controller) testing as well as powertrain system testing. The Kewell EVD series can be used to...

EVS Series Battery Simulator is a DC power system that simulates the output state of batteries based on types, and serial/parallel numbers. Widely...

High precision DC power supply for use in E-motor (controller) testing as well as powertrain system testing. The Kewell EVD series can be used to...

KAC Series is a high precision programmable grid simulator based on a two-stage power conversion structure, with three-phase adjustable by each...

KACL Series is a variable frequency AC power supply of two-stage power conversion structure, featuring high-precision, wide output range, and...

KAL Series Bidirectional AC Electronic Load is a power converter device based on power frequency isolation, and IGBT two-stage conversion...

KDL Series Energy Recycling DC Electronic Load is a power conversion device based on power frequency isolation, and IGBT two-stage conversion...

The sphere gaps can be used for Impulse, AC or DC voltage calibration according to the IEC 60052 recommendation. The sphere-gap presents the...

The coupling capacitors of the series KK or TK consist of 1 or more modular units, built into glass fibre reinforced epoxy tubes. Their applications...

The objective of EMI Conducted tests is to define the amplitude of current Ic and Voltage Vc emission from the Device Under Test (DUT) onto the power...

ETS-LINDGREN’S LOW DIELECTRIC TABLE (LDT) is a lightweight, portable test table, constructed with materials selected for their low dielectric...

The Ka-band LNB Series are the Low Noise Blocks which converts the satellite signal from Ka band to L band (1-2 Ghz). The equipment has a minimum...

The Ka-band LNB Series are the Low Noise Blocks which converts the satellite signal from Ka band to L band (1-2 Ghz). The equipment has a minimum...

ETS-Lindgren’s LPTC series panels are NEMA 1 type (for indoor controlled environments only) with two compartments to provide the necessary...

Hioki compact 1 or 2-channel data loggers feature a 60,000 data set/channel memory to measure temperature, humidity, voltage or instrumentation...