Standard modular or custom DEI screen industrial shielding enclosures provide the highest shielding performance available in a “hear-through,...

A New Standard in Knife Edge Door Technology for EMI/RFI Shielded Enclosures. To improve on the quality and performance of the traditional knife edge...

ETS-Lindgren’s type EHP (Extra High Performance) microwave absorber is designed for use over a wide frequency spectrum and has been used as an...

ETS-Lindgren manufactures EMC-20PCL from high quality, low density polyurethane foam. A double immersion process evenly impregnates the foam with a...

EMC-24PCL is an ultra broadband microwave absorber which has been optimized for EMC applications for MIL-STD461F. The EMC-24PCL Ultra Broadband...

The EMI pre compliance Set from Rohde & Schwarz (HAMEG) consist of all necessary instruments and software to measure typical EMI problems. It...

ETS-LINDGREN’S EMCenter is a flexible platform consisting of an integrated micro-controller, modular chassis, and a selection of optional plug-in...

ETS-LINDGREN’S EMControl is a versatile positioner controller which enables the user to synchronize simultaneous movement of two ETS-Lindgren...

Shielding effectiveness and air flow performance are improved with durable waveguide air vents produced by ETS-Lindgren’s exclusive solder...

ETS-LINDGREN’S EMPower PULSE RF/BURST POWER METER is designed to perform very fast measurements on high-frequency pulse-shaped signals (RF bursts)....

ETS-Lindgren’s EMQuest™ EMQ-100 Antenna Measurement Software offers a wide range of fully parameterized test methods for measuring basic...

ETS-LINDGREN’S EMSense MODULAR PLUG-IN CARD provides an interface for ETS-Lindgren’s battery-powered E-field probes. Each EMSense modular plug-in...

ETS-LINDGREN’S EMSwitch RF COAXIAL SWITCH MATRIX is a general purpose multi-channel switch matrix, used to switch the RF path of equipment for RF...

(Now Obsolette - See EMScanner) NEW! High resolution EMC and EMI testing has never been this fast! (min. resolution ? 120 microns). ERX+ is the...

ETS-Lindgren’s laser-powered EMSense 10 Electric Field Probe embodies the latest innovations in isotropic sensor design, low noise and...

The high performance typical to EUROSHIELD doors is shown by the graph below, which represents the results of measurements made in accordance with...

The least favourable point of the door was chosen for the attenuation test. ETS-Lindgren’s Euroshield brand door unit consists of frame and...

The RFSD-100 sliding doors were designed to meet the highest shielding requirements. The patented labyrinth sealing construction ensures light and...

The special large EUROSHIELD SRFSD-100 sliding doors are designed for applications in the reverb chambers and partial discharge rooms and according...

ETS-Lindgren FACT™ 10 Chambers offer semi-anechoic radiated emissions (RE) and fully anechoic radiated immunity (RI) compliance test...

ETS-Lindgren’s FACT™ 3 Chambers offer semi-anechoic radiated emissions (RE) and fully anechoic radiated immunity (RI) compliance test...

ETS-Lindgren’s FACT™ 25 CISPR Chambers offer semi-anechoic radiated emissions (RE) compliance testing over a frequency range of 70 MHz...

ETS-Lindgren FACT™ 5 Chambers offer the ability to perform radiated emissions testing at a 5 meter distance. While not required by any current...

ETS-Lindgren’s Filter Foam/Vent Absorber series microwave absorber is similar in appearance and geometry to conventional ETS-Lindgren pyramidal...

ETS-Lindgren’s Flat Laminate Absorber, a moderate performance broadband microwave absorber is a graded dielectric material that has been widely...

The FP-COMB 32 coupling/decoupling network – for Surge Combination Wave, Ring Wave and EFT/Burst – is fully compliant with the standard...

ETS-Lindgren’s FerroSorb™ FS-1001 is a numerically optimized hybrid that combines high performance carbon-loaded foam absorber with...

ETS-LINDGREN’S FERROSORB FS-1001H is a numerically optimized hybrid that combines high performance carbon-loaded foam absorber with...

FS-1250H is a numerically optimized hybrid that combines high performance carbon-loaded foam absorber with precision-manufactured ferrite tile, and...

ETS-Lindgren’s FerroSorb™ FS-1500H is a numerically optimized hybrid that combines high performance carbon-loaded foam absorber with...

The FS-400 High Performance Hybrid Ferrite Tile Absorber is designed for applications in three meter and SpaceSaverTM EMC...

ETS-Lindgren FerroSorb™ FS-600H is the latest evolution in low profile anechoic technology. Specially designed for three and five meter EMC...