CT6873 AC/DC Current Sensor
Hioki’s pass-through type AC/DC current sensors can be connected directly to Hioki Power Analyzers and Memory HiCorders. Also, it can be connected to Power Meters, Oscilloscopes, DMMs, etc. by using an optional sensor unit.
The CT6873 has a frequency bandwidth of DC to 10 MHz and a rated current of 200 A. It is used for R&D, quality evaluation, manufacturing, and maintenance in markets such as wireless charging systems, inverter motors for industrial equipment, power conditioners for PV, and quick charging facilities for EVs.
Use with an instrument with a high input impedance of 1 MΩ or higher.
Basic specifications
| Rated current | 200 A AC/DC |
|---|---|
| Max. allowable input | Within the derating range, up to ±420 A peak (design value) allowed at 40°C or less for 20 ms or less |
| Frequency bandwidth | Amplitude: DC to 10 MHz Phase: DC to 1 MHz |
| Basic accuracy | DC (±0.03% rdg. ±0.002% f.s., no phase specification) 45 Hz ≤ f ≤ 66 Hz (±0.03% rdg. ±0.007% f.s., ±0.05°) Specified up to 1 MHz |
| Output voltage rate | 10 mV/A rated (This device outputs AC+DC voltage via the Sensor Unit) |
| Max. rated voltage to earth | 1000 V CAT III |
| Core diameter | φ 24 mm (0.94 in) |
| Operating temperature, humidity | -40°C to +85°C, 80% RH or less (with no condensation) |
| Power supply | Power suppled via the Power Analyzer PW8001, PW6001, PW3390, or Sensor Unit CT9555, CT9556, CT9557 |
| Max. rated power | 6 VA max. (at 50 A/55 Hz, ±12 V power requirement) |
| Dimensions and mass | 70mm W × 100 mm H × 53mm D, CT6872: 370g, cable length 3m, CT6872-01: 690g, cable length 10m |
| Included accessories | Instruction Manual ×1, Mark bands ×6, Operating Precautions × |
